15 - 6
15 SECURITY FUNCTION
15.5 Clear All
This function is used to clear the all user data and password setting in Motion CPU.
Clear all can be executed in the following operation.
• Select "[Option]
[Clear All]" of the communication screen displayed by
"[Communication]
[Transfer]".
POINT
(1) Turn off the PLC ready flag (M2000) and test mode ON flag (M9075) to
execute "Clear All".
(2) Turn off the power supply of servo amplifier.
(3) All user data and password setting are cleared at the "Clear All". Backup of
user data and password setting data is recommended before clearance.
To Next Page
Loading...
