Mitsubishi Electric Q173CPU - Page 440

APP - 3
A
PPENDICES
Processing time of operation instruction (Continued)
Classifications Symbol Instruction Operation expression
Q173CPU(N)/Q172CPU(N)
Unit [
µ
s]
#0F=FIX(#4F) 11.40
FIX
D800F=FIX(D804F) 20.28
#0F=FUP(#4F) 12.00
FUP
Round-down
Round-up
D800F=FUP(D804F) 16.92
#0=BIN(#1) 8.82
D800F=BIN(D801) 12.30
#0L=BIN(#2L) 11.16
BIN BCD→BIN conversion
D800L=BIN(D802L) 14.82
#0=BCD(#1) 13.92
D800=BCD(D801) 17.70
#0L=BCD(#2L) 14.94
Standard
function
BCD BIN→BCD conversion
D800L=BCD(D802L) 26.10
#0=SHORT(#2L) 10.14
#0=SHORT(#4F) 14.70
D800=SHORT(D802L) 14.40
SHORT
Converted into 16-bit integer type
(signed)
D800=SHORT(D804F) 17.40
#0=USHORT(#2L) 9.90
#0=USHORT(#4F) 14.52
D800=USHORT(D802L) 14.10
USHORT
Converted into 16-bit integer type
(unsigned)
D800=USHORT(D804F) 16.50
#0L=LONG(#2) 9.00
#0L=LONG(#4F) 12.48
D800L=LONG(D802) 12.90
LONG
Converted into 32-bit integer type
(signed)
D800L=LONG(D804F) 18.60
#0L=ULONG(#2) 9.30
#0L=ULONG(#4F) 47.22
D800L=ULONG(D802) 7.62
ULONG
Converted into 32-bit integer type
(unsigned)
D800L=ULONG(D804F) 50.10
#0F=FLOAT(#4) 9.12
#0F=FLOAT(#4L) 9.48
D800F=FLOAT(D804) 13.56
FLOAT
Regarded as signed data and
converted into 64-bit floating point
type
D800F=FLOAT(D804L) 15.00
#0F=UFLOAT(#4) 7.92
#0F=UFLOAT(#4L) 10.26
D800F=UFLOAT(D804) 13.26
Type
conversion
UFLOAT
UFLOAT
Regarded as unsigned
data and converted
into 64-bit floating point type
D800F=UFLOAT(D804L) 15.06
SET M1000 = M0 13.74
SET M1000 = X100 14.26
(None) ON (normally open contact)
SET M1000 = PX0 14.82
SET M1000 = !M0 13.38
SET M1000 = !X100 14.40
Bit device status
! OFF (normally closed contact)
SET M1000 = !PX0 14.82
SET M1000 3.42
SET Y100 10.74
SET Device set
SET PY0 14.58
RST M1000 3.30
RST Y100 10.02
Bit device
control
RST Device reset
RST PY0 11.16