APP - 22
PPENDICES
2) Automatic refresh setting 1
Send range for each CPU CPU side device
CPU share memory G Dev. starting W0
CPU
Point Start End Start End
No.1 0
No.2 50 0800 0831 W0 W31
No.3
No.4
3) Automatic refresh setting 2
Send range for each CPU CPU side device
CPU share memory G Dev. starting W100
CPU
Point Start End Start End
No.1 0
No.2 640 0832 0AB1 W100 W37F
No.3
No.4
4) Automatic refresh setting 3
Send range for each CPU CPU side device
CPU share memory G Dev. starting
CPU
Point Start End Start End
No.1
No.2
No.3
No.4
5) Automatic refresh setting 4
Send range for each CPU CPU side device
CPU share memory G Dev. starting
CPU
Point Start End Start End
No.1
No.2
No.3
No.4
This device area is set
up in "M2400" with the
Qn(H) CPU No.1. (The
bit device for monitor is
transferred to "W0 to" b
the Motion SFC
program on the
Q173CPU(N) side.).
This device area is set
up in "D0" with the Qn
(H) CPU No.1. (The
ward device for monitor
is transferred to "W100"
to by the Motion SFC
program on the
Q173CPU(N) side.).
This setting area is used
for the use except for
the positioning device
for the monitor.
To Next Page
Loading...
