1 - 45
1 OVERVIEW
Detailes of each axis
Device No. Signal name
D1240 + 10n Unusable
D1241 + 10n Execute cam No.
D1242 + 10n
D1243 + 10n
Execute stroke amount
D1244 + 10n
D1245 + 10n
Current value within 1 cam shaft revolution
D1246 + 10n
D1247 + 10n
D1248 + 10n
D1249 + 10n
Unusable
(Note-1) : "n" in the above device No. shows the numerical value which
correspond to axis No.
Q173CPU(N) : Axis No.1 to No.32 (n=0 to 31)
Q172CPU(N) : Axis No.1 to No.8 (n=0 to 7)
(Note-2) : The unused aixs areas in the mechanical system program can be used as an
user device.
To Next Page
Loading...
