EasyManua.ls Logo

Mitsubishi Electric QD62D - Page 19

Mitsubishi Electric QD62D
128 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
2 - 3 2 - 3
MELSEC-Q
2 SYSTEM CONFIGURATIONS
(2) Support of the multiple CPU system
When using the QD62 (E/D) in a multiple CPU system, refer to the following
manual first.
• QCPU User's Manual (Multiple CPU System)
If the QD62 (E/D) is used in a multiple CPU system, there are no restrictions
depending on the module version.
Write intelligent function module parameters to the control CPU of the QD62
(E/D).
(3) Supported software packages
Relation between the system containing the QD62 (E/D) and software package is
shown in the following table.
GX Developer is necessary when using the QD62 (E/D).
Software Version
GX Developer GX Configurator-CT
Single CPU system
Version 7 or
later
Q00J/Q00/Q01CPU
Multiple CPU system
Version 8 or
later
Version 1.10L or later
(cannot be used with the
SW0D5C-QCTU-E 50F
or earlier versions)
Single CPU system
Version 4 or
later
SW0D5C-QCTU-E 00A
or later Q02/Q02H/Q06H/Q12H/
Q25HCPU
Multiple CPU system
Version 6 or
later
SW0D5C-QCTU-E 50F
or later
Single CPU system
Q02PH/Q06PHCPU
Multiple CPU system
Version 8.68W
or later
Single CPU system
Q12PH/Q25PHCPU
Multiple CPU system
Version 7.10L
or later
Version 1.13P or later
(cannot be used with the
SW0D5C-QCTU-E 50F
or earlier versions)
Q12PRH/Q25PRHCPU Redundant CPU system
Version 8.45X
or later
Version 1.16S or later
Single CPU system
Q00UJCPU/Q00UCPU/
Q01UCPU
Multiple CPU system
Version 8.76E
or later
Single CPU system
Q02U/Q03UD/
Q04UDH/Q06UDHCPU
Multiple CPU system
Version 8.48A
or later
Single CPU system
Q10UDHCPU/
Q20UDHCPU
Multiple CPU system
Version 8.76E
or later
Single CPU system
Q13UDH/Q26UDHCPU
Multiple CPU system
Version 8.62Q
or later
Single CPU system
Q03UDE/Q04UDEH/
Q06UDEH/Q13UDEH/
Q26UDEHCPU
Multiple CPU system
Version 8.68W
or later
Single CPU system
Q10UDEHCPU/
Q20UDEHCPU
Multiple CPU system
Version 8.76E
or later
Version 1.25AB or later
If installed in a MELSECNET/H remote I/O station
Version 6 or
later
SW0D5C-QCTU-E 50F
or later
(4) Connector
For the QD62(E/D), the connector is sold separately.
See Section 4.3 and make separate arrangements for the connector.

Table of Contents

Related product manuals