2 - 7 2 - 7
MELSEC-Q
2 SYSTEM CONFIGURATIONS
POINT
The serial No. on the rating plate may be different from the serial No. displayed on
the product information screen of GX Developer.
• The serial No. on the rating plate indicates the management information of the
product.
• The serial No. displayed on the product information screen of GX Developer
indicates the function information of the product.
The function information of the product is updated when a new function is
added.
(2) Checking the software version of GX Configurator-CT
The software version of GX Configurator-CT can be checked in GX Developer’s
"Product information" screen.
[Operating procedure]
GX Developer [Help] [Product information]
In the case of GX Develo
er Version 8
Software version
REMARK
The version indication for the GX Configurator-CT has been changed as shown
below from the SW0D5C-QCTU-E 50F upgrade product.
Previous product Upgrade and subsequent versions
SW0D5C-QCTU-E 50F
GX Configurator-CT Version 1.10L
To Next Page
Loading...
