Mitsubishi Electric QD62D - Page 81

7 - 7 7 - 7
MELSEC-Q
7 UTILITY PACKAGE (GX Configurator-CT)
3) From GX Developer, select:
[Online]
[Read from PLC] / [Write to PLC] "Intelligent function
module parameters"
Alternatively, from the intelligent function module selection screen of
the utility, select:
[Online]
[Read from PLC] / [Write to PLC]
<Text files>
(a) A text file can be created by clicking the Make text file
button on the initial
setting, Auto refresh setting, or Monitor/Test screen. The text files can be
utilized to create user documents.
(b) Text files can be saved in any directory.
However, a path (folder where the file is to be saved) cannot be created
during Make text file
operation, so create a folder in advance for saving
the file using Windows
R
Explorer.
QCPU
RUN.
ERR.
BAT.
BOOT.
RS-232
USB
Q25HCPU
MODE.
A
GX Developer/
GX Configurator-CT
Disk
Project
AA
B
Personal compute
r
A: Indicates intelligent function module parameter
B: Indicates data saved by text file
1)
2)
3)
Project
USER.
Figure 7.1 Correlation chart for data created with the utility package