Mitsubishi alpha 2 User Manual

α 2 Simple Application Controllers
AL2-2TC-ADP 13
ENG-74
13.3 Specification
Table 13.3: General Specification
Item Content
Operating Temperature (-25) - 55°C / (-13) - 131°F
Storage Temperature (-30) - 70°C / (-22) - 158°F
Humidty 35 ~ 85% Relative humidity, no condensation
Vibration Resistance - DIN Rail mounting
Conforms to IEC 68-2-6; 10-57: Hz: 0.075mm
Constant Amplitude
57-150Hz:9.8m/s
2
Acceleration. Sweep Count for
X, Y, and Z: 10 times (80 minutes in each direction)
Shock Resistance
Conforms to IEC 68-2-27: 147m/s
2
Acceleration, Action
Time: 11ms 3 times in each direction X, Y and Z
Noise Immunity 1000 Vpp, 1μs, 30-100Hz tested by a noise simulator
Dielectric Withstand Voltage
500V AC~>1min per IEC60730-1 between all terminals
and the DIN43880 control box or equivalent.
Insulation Resistance
7MΩ 500V DC IEC60730-1 between all terminals and
the DIN43880 distribution box or equivalent
Operation Ambience To be free of corrosive gases
Table 13.4: Power Specification
Item Content
External Supply for Analog output 24V DC +20%, -15%
Power consumption 0.5W
Table 13.5: Adjustment Standard
Item Content
EC Drective EMC Directive
EN61000-6-1
EN61000-6-2
EN61000-6-3
IEC IEC60730-1
UL, cUL UL508
Table 13.6: Hardware Specifications
Item
Specification
Centigrade (°C) Fahrenheit (°F)
Input
Specification
Thermocouple K Type, JIS 1602-1995 (IEC 584-1 1977, IEC 584-2 1982),
Isolated Type.
Compensated
Range
-50°C - 450°C-58°F - 842°F
Overall accuracy
±2.0% (range of all temperatures) and
±1.5% (at 25°C)
±2.0% (range of all temperatures) and
±1.5% (at 77°F)
Resolution 1°C / digit
D/A Conversion
Time
20.5ms
Isolation Circuit No isolation between channels (input/output) and power

Mitsubishi alpha 2 Specifications

General

Brand	Mitsubishi
Model	alpha 2
Category	Controller
Language	English