NOTE
l
The display units for the driving range, the
average fuel consumption, the average speed
and the momentary fuel consumption are
switched, but the units for the indicating
needle (speedometer), the odometer and the
tripmeter will remain unchanged.
l
The memory of the unit setting is erased if
the battery is disconnected, and it returns au-
tomatically to L/100 km.
The distance and speed units are also switch-
ed in the following combinations to match
the selected fuel consumption unit.
Fuel con-
sumption
Distance
(driving
range)
Speed
(average
speed)
L/100 km km km/h
mpg (US) mile(s) mph
mpg (UK) mile(s) mph
km/L km km/h
Changing the temperature unit
E00523100466
The display unit for temperature can be
switched.
1. Press and hold the multi-information
meter switch for about 2 seconds or
more to switch from the setting mode
screen to the menu screen.
Refer to “Changing the function settings
(when the ignition switch or the opera-
tion mode is ON)” on page 5-19.
2. Lightly press the multi-information me-
ter switch to select “
” (temperature
unit setting).
3. Press and hold the multi-information
meter switch for about 2 seconds or
more to switch in sequence from °C →
°F → °C.
The setting is changed to the selected
temperature unit.
NOTE
l
If the battery is disconnected, the unit setting
is erased from memory and is automatically
set to °C.
Changing the display language
E00523200715
The language of the multi-information dis-
play can be switched.
1. Press and hold the multi-information
meter switch for about 2 seconds or
more to switch from the setting mode
screen to the menu screen.
Refer to “Changing the function settings
(when the ignition switch or the opera-
tion mode is ON)” on page 5-19.
Multi-information display
5-22
OGAE15E5
Instruments and controls
5
To Next Page
Loading...
