2. Lightly press the multi-information me-
ter switch to select “LANGUAGE” (lan-
guage setting).
3. Press and hold the multi-information
meter switch for about 2 seconds or
more to display “LANGUAGE” (lan-
guage setting).
4. Lightly press the multi-information me-
ter switch to select the desired language.
5. If you hold down the multi-information
meter switch for about 2 seconds or
more, the setting is changed to the selec-
ted language.
NOTE
l
The memory of the language setting is
erased if the battery is disconnected, and it
returns automatically to ENGLISH or RUS-
SIAN.
l
If “---” is selected in the language setting, a
warning message is not displayed when
there is a warning display or interrupt dis-
play.
Operation sound setting
E00523401714
You can turn off the operation sounds of the
multi-information meter switch and daytime
dipper button.
1. Press and hold the multi-information
meter switch for about 2 seconds or
more to switch from the setting mode
screen to the menu screen.
Refer to “Changing the function settings
(when the ignition switch or the opera-
tion mode is ON)” on page 5-19.
2. Lightly press the multi-information me-
ter switch to select “ ” (operation sound
setting).
3. Press and hold the multi-information
meter switch for about 2 seconds or
more to switch in sequence from ON
(operation sound on) → OFF (operation
sound off) → ON (operation sound on).
The setting is changed to the selected
condition.
Multi-information display
5-23
OGAE15E5
Instruments and controls
5
To Next Page
Loading...
