Mitsubishi ASX 2016

Cooling (Manual air condition-
ing)
E00701900684
1. Set the mode selection dial to the “ ”
position.
2. Set the air selection switch (A) to the
outside position.
3. Push the air conditioning switch (B).
4. Change the temperature by turning the
control dial clockwise or anticlockwise.
5. Select the desired blower speed.
CAUTION
l
If the outside air is dusty or otherwise conta-
minated, or if high cooling performance is
desired, set air selection switch to the recir-
culation position and the temperature control
dial all the way to the left.
Switch to the outside position periodically to
increase ventilation so that the windows do
not become fogged up.
NOTE
l
When the air conditioning operates with the
selection switch in the outside position, the
system automatically determines whether to
continue using outside air or to perform re-
circulation. If the outside air temperature is
high, the system selects recirculation to ach-
ieve rapid cooling and causes the indication
lamp in the switch to illuminate. Press the
selection switch to return to outside air intro-
duction.
Combination of unheated air
and heated air (Heater/Manual
air conditioning)
E00702000435
Select the mode selection dial to the position
shown in the illustration and set the air selec-
tion switch (A) to the outside position.
The air flow will be directed to the leg area
and the upper part of the passenger compart-
ment. Select the desired blower speed.
Warm air flows to the leg area and unheated
or slightly warm air (depending upon temper-
ature setting) flows to the upper part of the
passenger compartment.
Heater/Air conditioning
7-08
OGAE15E5
For pleasant driving
7