3. Press the switch or switch to select
the sound, and then press the switch to
confirm the setting.
The setting is changed to the selected
condition.
NOTE
l
The operation sound setting only deactivates
the operation sound of the multi-information
display switches and rheostat illumination
button. The warning display and other
sounds cannot be deactivated.
Changing the time until “REST
REMINDER” is displayed
E00523501858
The time until the display appears can be
changed.
1. Switch to the function setting screen.
Refer to “Changing the function set-
tings” on page 5-13.
2. Press the switch or switch several
times to switch to the “REST REMIND-
ER” screen. Then, press the switch to
switch to the setting selection screen.
3. Press the switch or switch to select
the time, and then press the
switch to
confirm the setting. The setting is
changed to the selected time.
NOTE
l
The drive time is reset when the ignition
switch is turned off or the operation mode is
put in OFF.
Changing the turn-signal sound
E00529101508
It is possible to change the turn-signal sound.
1. Switch to the function setting screen.
Refer to “Changing the function set-
tings” on page 5-13.
2. Press the switch or switch several
times to switch to the “TURN SIGNAL
SOUND” screen. Then, press the
switch to switch to the setting selection
screen.
3. Press the switch or switch to select
the sound, and then press the switch to
confirm the setting.
The setting changes to the selected turn-
signal sound.
Changing the instant fuel con-
sumption display
E00529201424
It is possible to change the bar graph setting
of the instant fuel consumption display.
1. Switch to the function setting screen.
Refer to “Changing the function set-
tings” on page 5-13.
Multi-information display
5-19
OGKE18E1
Instruments and controls
5
To Next Page
Loading...
Need help?
General
