Adjusting the brightness of the
display
When the display is open, push the side or
side of the switch to adjust the bright-
ness of the display. The brightness can be ad-
justed to 16 different levels.
Switching the navigation infor-
mation display
On vehicles equipped with MITSUBISHI
Multi- Communication System (MMCS), you
can select whether to display the navigation
information on the display.
1. To change the display setting, push the
switch when the display is open.
2. The setting top screen will be displayed,
push and hold the switch.
3. The display setting screen will be dis-
played.
Navigation information: ON
Navigation information: OFF
4. Push the side of the switch to select
“NAVI INFORMATION ON” or “NA-
VI INFORMATION OFF”, and then
push the
switch.
Head Up Display (HUD)*
5-53
OGKE18E1
Instruments and controls
5
To Next Page
Loading...
Need help?
General
