4
Removal and reinstallation of the cover
2.2 Removal and reinstallation of the cover
2.2.1 Front cover
3.7K or less
zRemoval (Example of FR-D740-1.5K)
1) Loosen the installation screws of the front cover. (The screws cannot be removed.)
2) Remove the front cover by pulling it like the direction of arrow.
zReinstallation (Example of FR-D740-1.5K)
1) Place the front cover in front of the inverter, and install it straight.
2) Tighten the installation screws on the front cover.
1)
Installation screw
2)
1) 2)
Installation screw
To Next Page
Loading...
