8 9. DETAILS OF EACH FUNCTION
I
OPERATION MODE SELECTION, PARAMETER WRITE PROHIBITION ‘AND
REVERSING PREVENTION
I
Parameter WRITE prohibition
q
I-?
WRITE parameter can be prohibited. .
Setting
” 0 ”
. Description
WRITE parameter is possible. (Initial setting)
I
9, 1,
1
I
WRITE parameter is impossible. (Note)
Note: Function (parameter) No. 77 and 79 can still be written.
Reversing prevention
q q
Reversing of motor operation can be prevented.
Setting Description ’
” 0 ”
Motor operation can be reversed. (initial setting)
n ,,
1 Motor operation cannot be reversed. (Note)
Note: Reversing is impossible in ” PU operation ” mode as well as in ” external
signal operation ” mode.
Operation mode selection [91 @l
Operation mode can be fixed to either ” PU operation ” or ” external signal
operation ” , or both.
.
Setting ’
Description
” 0 ”
Switching between “,PU operation ” and ” external signal
operation ” is possible. (Initial setting)
1, ,t
1
Only ” PU operation ” is possible.
‘99
2 ” Only
” external signal operation ” is possible.
Note: Function (parameter) No. 79 can be changed even in ” external
‘.
I
signal operation ” mode.
_ -.
.
..-
.
-87-
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
