MAXIMUM OUTPUT FREQUENCY SETTING
Frequency with reference voltage signal at 5 V [21
q
Frequency with reference current signal at 20mA
q
•I
Output frequency at DC5 V (or DC lOV> or
20mA of frequency reference signal can be
set. That is, the maximum output frequency
in ” external signal operation ” mode is set.
Acceleration/deceleration time is the time
taken for acceleration or deceleration up
O” Fraquemy refersllfe signal 5v (tov)
2OlllA
to the maximum frequency.
Note: The set maximum frequency changes automatically when setting. of ” gain
for frequency reference voltage signal” or ” frequency reference current
signal, gain I’ (see P.36) is changed. Since this function has the priority
level same as that of 3 rd function CC.!- 3 and C- 5 > , priority is given to
the latest set function, when this function is set together with a 3 rd
function.
MAXIMUM/MINIMUM FREQUENCY LIMIT
Maximum frequency limit
q
Minimum frequency limit [ZJ
Note: When minimum limit frequency is set,
1
it should be higher than the starting g
frequency (see
” Starting frequency
d
ency may not be higher than 120Hz.
-----es_-------
,’
---
,’
1 Mu. limit hquency
,’
1
-setting lnnp
,A--+ ..------A-
Output frequency can be clamped to desired
maximum and/or minimum frequency.
setting ” , P.106) . Maximum limit frequ
Frequency reference signd 5V (1OV)
0
0
0
-98-
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
