8 6. MONITOR
Output frequency, output voltage (including that during acceleration and
deceleration) ,
motor current, direction of rotation of motor, and alarm
condition can be monitored by performing operations described below.
MONITOR is possible after -1 key is pressed.
0
Operation
Display example
t?
Inverter output frequency can be read by
s
pressing [MONITORI key.
=I.
B
&
Note: If g
a
key is pressured during
s
0 v
a
3
monitoring, MONITOR mode is cancelled
ā0ā
and the preset output frequency is
displayed.
,.
0 0 0
Motor current can
be
read by pressing
8 -1 key.
0 Hz
2
Note: Motor current during acceleration or
deceleration can be also displayed.
.
k
5
Displayed current, however, will not
. ,
h 0 0 0
2
change if acceleration or deceleration
is momentary.
; 2 Inverter output voltage can be displayed
[Plzlml
0 Hz
$? by pressing 1-l key twice successively.
o *
>
, , o o o
9.
:a. v
Alarm code can be read by pressing
[i5izFq three times successively.
0
0
-a8-
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com