Mitsubishi FREQROL-Z200-UL - Page 116

,* . _ “,“_ ..-_. --__c_I_ _..__ _,... ..- -_.-. _._.-.Ic____
r”
f-
‘.*-
OUTPUT FREQUENCY ADJUSTMENT
Bias for frequency reference voltage signal -1
Gain for frequency reference voltage signal I=[
Bias for frequency reference current signal l-4/
Gain for frequency reference current signal I-1
Output frequency ramp for any frequency reference signal as follows
(DC 0 - 5 V, 0 -lOV, 4 -2OmA) can be set.
Output frequency can be set for
frequency reference signal input through
terminals 2 and 5 (or 4 and 5 > .
IGAIN]
T
*Gain
1
* When this gain. is specified, value
set for “frequency at 5 V input
voltage ” (function No. 20) or
Output frequency can be set for
frequency reference signal input through
terminals 2 and 5 (or 4 and 5 > .
” frequency at 20mA input ” is
When frequency reference signa is 0 V,
changed correspondingly.
the signal is judged to be 5 V (or
lOV> , or 2OmA.
-lll-
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com