i
‘)
Voltage class
2oov
Model FR-2220-
FR-Z220
-0.4K I-0.75KI -1.5KI -2.2KI -3.7KI -5.5KI -7.5K) -1lK 1 -15K 1 -22K ) -3OK 1 -37K 1 -45K 1 -55K
g
Torque boost Manual and automatic torque boost
3
8
Regenerative Min. 150% Min. 100%
5 Braking brake
0
(short time) (short time)
Capacitor charge (min. 20%’
3
)
;,
torque
DC dynamic
brake
Operating frequency ( 0 - ,60Hz) , operating time ( 0 - 10sec) , voltage (torque) adjustable
!s
i=i
E:
Stall preventive function
2
threshold current
Threshold current can be set.
s
Rated overload current, 150% for 1 min., 200% for 0.5sec.
Frequency reference DC0 - 5 V, 0 - lOV, 4 - 20mA
signal Auxiliary frequency reference signal : DC 0 - + 5 V, 0 - &lOV
Start signal
Independent “forward start” and “reverse start”,
and start signal self-holding ( 3 -wire
input) are applicable.
E’
Acceleration/deceleration
‘S
time
o 1
. - 3600sec. (acceleration and deceleration and times can be set independently)
$ .
r;t
‘i;
2 nd acceleration/
a
deceleration time
0.1 - 3600sec. (acceleration and deceleration and times are set identically)
iit
Acceleration/deceleration
T;;i
pattern
“Linear pattern” or “S pattern” can be selected.
g
‘3
2
Multi-speed setting
Maximum 7 speed ranges can be set (adjustable within range from 0 Hz to 360Hz in
%
each speed range)
0
Maximum and minimum Maximum frequency limit adjustable range : 0 - 36OHz
frequency limit setting Maximum frequency limit adjustable range : 0 - 60Hz
JOG mode operation JOG mode select terminal is available (‘4 ‘1 .
Reset signal External reset signal input terminal is available.
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
Need help?
General
