Mitsubishi Fuso CANTER FE85DE6SLGP User Manual

12
12-23
Special tools
Removal procedure
Removal: Oil filter
Installation procedure
Installation: Oil filter
• Clean the oil filter mounting surface of the oil filter head.
• Apply a thin coat of engine oil on the oil filter gasket.
• Screw in the oil filter by hand until the gasket touches the oil filter
head. Then, tighten the filter by turning it further by three quar
-
ters (3/4) of a turn.
• After installing the oil filter, start the engine and check that there
are no oil leaks from the gasket.
• Remove and reinstall the oil filter if it is leaky.
• Add a specified amount of engine oil.
• Run the engine for 1 minute or longer to fill the oil filter with the
engine oil.
• Stop the engine and check the engine oil level.
• Add engine oil if necessary.
Mark Tool name and shape Part No. Application
Oil filter element socket MH061566 Removal of oil filter

Mitsubishi Fuso CANTER FE85DE6SLGP Specifications

General

Brand	Mitsubishi
Model	Fuso CANTER FE85DE6SLGP
Category	Trucks
Language	English