FX1S Series Programmable Controller Introduction 1
1-8
1.4.2 Limits of Expansion
The following conditions cannot be accomplished the FX
1S
Series PLC:
- The use of Special Function Blocks.
- Supply a 5V DC service supply.
-Use FX
1N
-422-BD + FX-2PIF.
- Use the FX
1N
-5DM and the FX-10DM concurrently.
- Use more than one FX-10DM at the same time. For example, the configuration
FX-10DM + (FX
1N
-422-BD + FX-10DM) is not allowed.
1.5 EEProm Backup Data
FX
1S
existing data will be kept for 5 minutes during power down before the data is lost.
The capacitor backed memory will retain programs for 10 days and the capacitor requires 30
minutes to recharge upon powerup.
To Next Page
Loading...
