Mitsubishi FX1S-30MR-DS User Manual

FX1S Series Programmable Controllers Power Supply 4
4-5
4.6 Earthing / Grounding
Use a cable at least 0.2mm
2
(AWG24) to ground equipment. Ground resistance must be
less than 100Ω (class D). Note that the ground cable must not be connected to the same
ground as the power circuits. Grounding is recommended but if a proper ground cannot be
provided the PLC will still operate correctly without being grounded.

Mitsubishi FX1S-30MR-DS Specifications

General

Brand	Mitsubishi
Model	FX1S-30MR-DS
Category	Controller
Language	English