Mitsubishi MELSEC-A series - 6.4 Remote IO Station Programming

EACH FUNCTION
This operation ctears all parameters written to the ACPU and sets them to
default.
[Sample operation]
All the parameters of the ACPU are cleared and are set to default
2 PABW. SBTTIBO
2 PARAM. SBTTIW
PARAM. BETTIIPO
PARAM. SETTIUO
COMPLETED
Select the PARAMETER mode.
Select '1:PARAM. ALL CLEAR'.
Move the cursor to "YES..
When the parameters in the A8PUE
are set to default, the screen shown
on the left is displayed.
Select YES.
When the writing of parameters in
the A8PUE to an ACPU have been
completed, 'COMPLETED"
is dis-
played.
Pressing the [GO] key when the cur-
sor is at 'NO' returns to the @ opera-
tion.
1
6-58
t
i