5.
Q,PERATING
PROCEDURES
MELSEGA
5.3
Dlsplay Adjustments and Dlsplay Format
This section explains how to adjust the display
and
the display format
of
the
A8PUE.
The position where each character is shown on the display is indicated by
the
dotted
lines
in
the display explanations given below.
Dotted lines are for explanatory
-------
IIIII
purposes only.
After starting up the A8PUE, the brightness
of
the display can be adjusted by
turning the brightness adjustment thumbwheel on the left side
of
the unit.
Adjust as necessary.
5.3.2
Display
backlight
OWOFF
stater,
The backlight is
ON/OFF
in the following cases:
When the backlight is
ON,
perform operations as necessary.
(1)
Goes
ON
When the A8PUE is started up
When starting/restarting key inputting
(2)
Goes
OFF
If
a key is not input for
10
minutes or more
5-
10
To Next Page
Loading...
Need help?
General
