Mitsubishi MELSEC-A series - Page 63

5. OPERATING .. PROCEDURES
MEWA
(Example 5) When ANDDcPH~FFFF D20 is input
(4) Handling devices
MI L, and S
For the devices M, L, and S in the TEST, MONITOR, WRITE, and INSERT
modes, the display varies in accordance with the contents set by param-
eters.
For example, if LD
LO is input when the parameter settings are MO to 999
and LlOOO to L2047, LD MO will be displayed.
,
1
.
j
f
5- 17