1 - 10
1.2 Features
1
OVERVIEW
(c) PROFIBUS-DP
When the PROFIBUS-DP master module detects a fault or communication failure
with slave stations, the both systems are switched so that the communications
can be continued.
(4) Redundant system settings using parameters.
Redundant system settings such as tracking settings, network pairing settings, etc.
can be made easily in the parameter settings of GX Developer.
Diagram 1.6 System Configuration for PROFIBUS-DP
An error has
been detected
Tracking cable
Control system
DP - Slave
DP - Slave
Standby system
Bus terminator Bus terminato
Tracking cable
New standby
system
DP - Slave
DP - Slave
New control
system
Control
system
Standby
system
Bus terminator Bus terminato
System switching
To Next Page
Loading...
