Mitsubishi Q12PRHCPU - Page 35

1
OVERVIEW
1.2 Features
1 - 11
1
OVERVIEW
2
SYSTEM CONFIGURATION
3
TRACKING CABLE
4
PROCEDURE FOR STARTING UP A REDUNDANT SYSTEM
5
REDUNDANT SYSTEM FUNCTIONS
6
REDUNDANT SYSTEM NETWORKS
7
PROGRAMMING CAUTIONS
8
TROUBLESHOOTING
(5) Writing parameters and programs to control system and standby system
without the need to identify each system
Parameters and programs can be written into both of control system and standby
system using GX Developer. There is no need to identify each system.
( Section 5.6.1)
Diagram 1.7 Writing to the Control System and Standby System by Download to PLC
Control system Standby system
Tracking cable
1) to 3) denotes the process up to writing.
1)
2)
3)
Execute PLC Write
Write to Control system
Write to Standby system
3)
1)
2)
GX Developer