4
PROCEDURE FOR STARTING UP A REDUNDANT
SYSTEM
4.2 Wiring
4 - 9
1
OVERVIEW
2
SYSTEM
CONFIGURATION
3
TRACKING CABLE
4
PROCEDURE FOR
STARTING UP A
REDUNDANT SYSTEM
5
REDUNDANT SYSTEM
FUNCTIONS
6
REDUNDANT SYSTEM
NETWORKS
7
PROGRAMMING
CAUTIONS
8
TROUBLESHOOTING
(2) Connecting the Q6BAT Battery Connectors
The CPU module Q6BAT batteries are shipped with the battery connectors
disconnected.
Connect the battery connectors according to the following procedure prior to use.
(a) Confirming Battery Installation Status
Open the CPU module bottom cover, and confirm that the battery is installed
properly.
(b) Connecting the Battery Connectors
Align the connector mounted in the case with battery connector pin and insert it.
Remark
Refer to the following manual, for installation of Q7BAT batteries and SRAM card
batteries applicable to CPU modules.
QCPU User's Manual (Hardware Design, Maintenance and Inspection)
Diagram 4.5 Connecting the Case Connector and Battery Connector Pin
Battery
Connector
Connector Stay
CPU module
To Next Page
Loading...
