Need help?Do you have a question about the Mitsubishi Q68ADI and is the answer not in the manual?
General| Model | Q68ADI |
|---|---|
| Category | Controller |
| Manufacturer | Mitsubishi |
| Type | Analog Input Module |
| Number of Channels | 8 |
| Accuracy | ±0.1% of full scale |
| Operating Temperature | 0 to 55°C |
| Input Range | Voltage: -10 to +10 V, Current: 0 to 20 mA, 4 to 20 mA |
| Power Supply | 5V DC |
| Resolution | 16 bits |
| Isolation | Photocoupler isolation between analog and digital circuits |
Safety guidelines related to product design and usage.
Guidelines for safe and correct module wiring practices.
Covers detailed technical performance metrics of the A/D conversion modules.
Specifies the measurement accuracy under various ambient temperature conditions.
Describes the sampling and averaging processing methods for A/D conversion.
Maps buffer memory addresses to specific module functions and data.
Maps buffer memory addresses to specific module functions and data.
Configures which channels are active for A/D conversion processing.
Selects channels for applying offset and gain calibration adjustments.
Essential guidelines to prevent damage or malfunction during handling.
Step-by-step process for setting up and preparing the module for operation.
Important considerations for noise-free and reliable external wiring.
Important considerations for noise-free and reliable external wiring.
Illustrates specific wiring connections for the Q64AD, Q68ADV, and Q68ADI modules.
Explains how to configure module settings using switches via GPPW.
Detailed procedure for calibrating analog input ranges using offset/gain.
Lists common error codes, their descriptions, and processing steps.
Guides on diagnosing problems when the RUN LED is flashing or off.
Guides on diagnosing problems when the RUN LED is flashing or off.
Guides on diagnosing problems when the ERROR LED is on or flashing.
To Next Page
