Mitsubishi S3L2 Service Manual

154 / 195
Service Manual Mitsubishi SL-Series diesel engines
Version 08/2004
ENGLISH
FUEL INJECTION PUMP FUEL SYSTEM
154 / 195
Figure 227 Adjusting plates
Adjusting plates
NOTE
a. When replacing the plungers and barrels or
delivery valves, do not loosen the adjusting
plates between the pumping elements.
b. After these parts have been replaced, the
injection quantity must be measured. Pump
Tester Cam Box is needed for measurement of
injection quantity.
c. Keep the disassembled injection pump parts in
clean diesel fuel.

Mitsubishi S3L2 Specifications

General

Engine Model	S3L2
Aspiration	Naturally aspirated
Cooling System	Water-cooled
Displacement	1.318 L
Bore x Stroke	78 mm x 92 mm
Starting System	Electric starter
Lubrication System	Forced lubrication by trochoid pump