Mitsubishi S3L2 Service Manual

56 / 195
Service Manual Mitsubishi SL-Series diesel engines
Version 08/2004
ENGLISH
Cylinder Block, Crankshaft, Pistons
and Oil Pan
DISASSEMBLY
56 / 195
t
2. Insert the push rod of the tool into the bore in the
piston for the piston pin and, using an arbor press,
remove the piston pin.
3. Use this Piston Pin Setting Tool to install the
connecting rod to the piston.
t
Figure 61 Removing piston pin (1)
Push rod (tool)
Connecting rod
Identification mark
Tool body
Piston pin
Arrow mark
Piston
Figure 62 Removing piston pin (2)
CAUTION
Do not attempt to remove the piston pin by tapping.
Replace a piston pin which needs a greater force for
removal.

Mitsubishi S3L2 Specifications

General

Engine Model	S3L2
Aspiration	Naturally aspirated
Cooling System	Water-cooled
Displacement	1.318 L
Bore x Stroke	78 mm x 92 mm
Starting System	Electric starter
Lubrication System	Forced lubrication by trochoid pump