Mitsubishi S3L2 Service Manual

97 / 195
Service Manual Mitsubishi SL-Series diesel engines
Version 08/2004
Timing Gears and Flywheel
ENGLISH
ASSEMBLY
5. Have someone hold the crankshaft pulley with a
wrench to prevent the flywheel from rotating.
6. Tighten the four bolts that hold the flywheel to the
specified torque.
Figure 153 Tightening flywheel bolts
Tightening torque
13.5 ± 0.5 kgf·m
(98 ± 4 lbf·ft)
[132 ± 5 N·m]
WARNING
Always signal each other to prevent possible
personal injury.

Mitsubishi S3L2 Specifications

General

Engine Model	S3L2
Aspiration	Naturally aspirated
Cooling System	Water-cooled
Displacement	1.318 L
Bore x Stroke	78 mm x 92 mm
Starting System	Electric starter
Lubrication System	Forced lubrication by trochoid pump