29
Remote Control Functions: Special Functions
When your remote control has been Programmed to operate another manufacturer’s product, the function
performed on each layer may vary. The most common functions are:
Remote Control Functions: Operation of PIP and POP
Picture-In-Picture (PIP) and Picture-Outside-
Picture (POP) features allow you to view
Programming in different ways. While watching
the main screen, you can display programs from
other channels and other inputs. To see which
inputs can and cannot be used together, see How
Connections Affect the PIP and POP, page .
You can display large and small PIPs, side-by-side
pictures, three POPs, or nine POPs.
Activating the PIP and POP
Press PIP/POP to choose a display format. Each
time the PIP/POP button is pressed on the TV
remote control (within seconds of each other),
the PIP/POP cycles through the following display
options.
1. POP: side-by-side pictures
2. POP: three POPs
3. POP: nine POPs
4. PIP: large PIP
5. PIP: small PIP
To turn PIP/POP Off, wait at least seconds,
and press PIP/POP. The next time you activate
PIP/POP, the last used PIP/POP format will be
displayed first.
To Next Page
Loading...
Need help?
General
