Mitutoyo EH Series - 4.4 Preset

4 Basic Operations
27
No. 99MBC109B
4.4
Preset
The current value of the Counter can be set to an arbitrary value at any point
within the Linear Gage measuring range.
As an example, the procedure for presetting the datum to 10.000 mm is
explained.
1
Press and hold [SEL]. (For 1-axis models, proceed to step
2
.)
»
The selected Display will blink.
Tips
Each time you press [SEL], the blinking switches between Display A and Display B.
"4.1 Switching Between Display A and B (2-Axis Models Only)" (page 25)
2
Press [P.SET].
» The previous Preset value will be
displayed (when the previous value is
10.000).
3
Press [MODE].
» The input digit will shift to the right.
4
Press [A_ZERO]/[ZERO] or [B_ZERO].
»
The Preset value will be modied.
5
Repeat steps
3
and
4
until you have set the desired Preset value.
6
Press [P.SET].
»
The Counter will return to the Counter display.
Tips
To cancel the input, press [SEL]/[CE]. The Counter will return to the Counter display.