Mitutoyo EH Series - 7 Specifications; 7.1 Basic Specifications

7 Specications
53
No. 99MBC109B
7
Specications
7.1
Basic Specications
Code No. 542-075 542-071 542-073 542-074 542-072
Model No. EH-101P EH-102P EH-102Z EH-102S EH-102D
Number of
display axis
1 axis 2 axes
Display Minus (-) sign and 8 numeric digits (green LED)
Minimum
reading
0.01/0.005/0.001/0.0005/0.0001 mm
(selection by parameter)
Set
automatically
according to
the gage
0.01/0.001
µm
Maximum
input
frequency
2.5 MHz (2-phase square wave) 1 MHz
(2-phase
sine-wave)
Power
source
voltage
Supplied AC adapter or DC +12 V to 24 V
Power
consumption
Max. 8.4 W (Max. 700 mA); Guarantee a minimum power supply of 1 A per
unit from the commercial power supply.
Operating
temperature
(humidity)
range
0°C to 40°C (20% RH to 80% RH, without condensation)
Storage
temperature
(humidity)
range
-10°C to 50°C (20% RH to 80% RH, without condensation)
External
dimensions
144 (W) × 72 (H) × 156.7 (D) mm
Mass
Approx. 760
g
Approx. 800
g
Approx. 800
g
Approx. 900
g
Approx. 800
g
CE marking EMC directive EN61326-1
Immunity test requirement: Clause 6.2 Table 2
Emission limit: Class B
RoHS directive EN50581
Functions Zero setting, Preset, Measurement mode switching (maximum value,
minimum value, TIR value), Tolerance judgment output (3-step/5-step
switchable), Constant factor scaling display
Calculation between axes (sum, difference)
Interface RS-232C / USB / Digimatic / I/O