Need help?Do you have a question about the Mitutoyo HDM 192 Series and is the answer not in the manual?
General| Brand | Mitutoyo |
|---|---|
| Model | HDM 192 Series |
| Category | Measuring Instruments |
| Language | English |
Diagram labeling all parts of the height gage for identification.
Explains the function of each button on the device's control panel.
Step-by-step instructions for replacing the batteries in the unit.
Details the absolute measuring system and its display characteristics.
Details the incremental measuring system and its display characteristics.
Instructions for changing between absolute and incremental measuring modes.
Demonstrates measuring heights and steps using ABS and INC modes.
Illustrates measuring dimensions A, B, C, D using preset and hold functions.
Details steps for setting origin and taking measurements with a scriber.
Explains two methods for setting a desired preset value for measurements.
Describes how to hold and release the displayed measurement value.
Procedures for setting zero in ABS and INC measuring modes.
How to switch between measuring modes and units.
Illustrates measuring dimensions using a touch signal probe.
Details key operations for touch probe measurement functions.
Instructions on how to connect a processor to the height gage for data transfer.
Details the various methods for outputting measurement data to a processor.
Provides the pin configuration for the data output connector.
Describes the structure and format of the output data for processing.
Illustrates timing diagrams for data transfer signals and communication.
Lists available optional accessories for the height gage, such as probes and cables.
To Next Page
