Mitutoyo ID-C0550NXB - Installing with Various Backs

9
No. 99MAH057A
2 Preparations before Use
2.2.2 Installing with Various Backs
Various backs (optional) for dial indicator can be used to secure the product to
the jig. Refer to the Measuring Instruments Catalog for details of various backs.
E.g.: Back with lug
21
A
3
Flat back
1 Removethescrewsontheback(4screwsexcludingA)usinga#0Phillips
screwdriver.
2 Linetheoptionalbackupwiththeatback,andthenxitusingthe
screws that were removed in 1 .
3 Securethebacktothejig.