65
No. 99MAH057A
5 Setting Parameters
(Short press) / (Long press)
5.11.2 Calibration Schedule Warning Selection/Setting
By setting the current date, calibration date and advance warning date, the
warning display (
) notifying the arrival of calibration schedule will be lit on the
display.
Enable/disable calibration schedule warning function, current date, calibration
date and advance warning date can be changed.
Tips
If the power is turned ON/OFF using the [F3] key, it is not necessary to reset the
current date. However, if the battery is removed, the current date must be reset when
the power is turned on again.
2
-2
1 2
-1
2
-2
F2F2
F2
F1/F3
Go to step
3
Go to the
next item
To Next Page
Loading...
