Mitutoyo ID-C0550NXB - Lifting Knob (Optional)

11
No. 99MAH057A
2 Preparations before Use
2.3.2 Lifting Knob (Optional)
For lifting knobs (optional) that can be mounted to this product, refer to "10
Accessories (Optional)" on page 91.
NOTICE
Usingtheproductwhiletheliftingknobisnotsecuredrmlymaydamageinternal
components or the workpiece.
2
1
3
Lifting knob
Lifting knob cap
Upper edge of bushing
This product's cap
1 Rotatethecapcounterclockwisetoremoveitfromtheproduct.
2 Fixtheplunger,usingplierspaddedwitharag,etc.,sothatitdoesnot
turn,andtheninserttheliftingknobtothescrew(M2.5)ontheupper
edge of the plunger.
3 Turnthecapontheliftingknobtoxittotheupperedgeofthebushing.
Tips
• Store the removed cap to prevent loss.
• Do not remove the ring attached under the cap, and install the cap of the lifting
knob.