Printed in Japan
Mitutoyo Corporation 1-20-1 Sakado, Takatsu-ku, Kawasaki City, Kanagawa 213-8533
14. Specifications
■Individual specifications
Model Name ID-C125XB ID-C125MXB ID-C125EXB
Code No. 543-470B 543-471B 543-472B
Measuring range 25.4 mm 25.4 mm/1 in
Resolution 0.001/0.01 mm
0.001/0.01 mm
0.00005/0.0001/0.0005 in
Error of indication for the
total measuring range
MPE
E
*1
0.003 mm 0.003 mm/0.0001 in
Hysteresis
MPE
H
*1 0.002 mm 0.002 mm/0.0001 in
Repeatability
MPE
R
*1 0.002 mm 0.002 mm/0.0001 in
Stem ø8 mm
3/8 in DIA (ø9.52 mm)
Contact point
Carbide (M2.5 x 0.45) Carbide (No.4-48UNF)
Measuring force MPL ≤1.8N
Mass 185 g 185 g 190 g
Model Name ID-C1025XB ID-C1025MXB ID-C1025EXB
Code No. 543-474B 543-475B 543-476B
Measuring range 25.4 mm 25.4 mm/1 in
Resolution 0.01 mm
0.01 mm
0.0005 in
Error of indication for the
total measuring range
MPE
E
*1
0.02 mm 0.02 mm/0.001 in
Hysteresis
MPE
H
*1 0.02 mm 0.02 mm/0.001 in
Repeatability
MPE
R
*1 0.01 mm 0.01 mm/0.0005 in
Stem ø8 mm
3/8 in DIA (ø9.52 mm)
Contact point Carbide (M2.5 x 0.45)
Carbide (No.4-48UNF)
Measuring force MPL ≤1.8N
Mass 185 g 185 g 190 g
Model Name ID-C150XB ID-C150MXB ID-C150EXB
Code No. 543-490B 543-491B 543-492B
Measuring range 50.8 mm 50.8 mm/2 in
Resolution 0.001/0.01 mm
0.001/0.01 mm
0.00005/0.0001/0.0005 in
Error of indication for the
total measuring range
MPE
E
*1
0.005 mm 0.005 mm/0.0002 in
Hysteresis
MPE
H
*1 0.002 mm 0.002 mm/0.0001 in
Repeatability
MPE
R
*1 0.002 mm 0.002 mm/0.0001 in
Stem ø8 mm
3/8 in DIA (ø9.52 mm)
Contact point Carbide (M2.5 x 0.45)
Carbide (No.4-48UNF)
Measuring force MPL ≤2.3N
Mass 260 g 260 g 265 g
Model Name ID-C1050XB ID-C1050MXB ID-C1050EXB
Code No. 543-494B 543-495B 543-496B
Measuring range 50.8 mm 50.8 mm/2 in
Resolution 0.01 mm
0.01 mm
0.0005 in
Error of indication for the
total measuring range
MPE
E
*1
0.04 mm 0.04 mm/0.0015 in
Hysteresis
MPE
H
*1 0.02 mm 0.02 mm/0.001 in
Repeatability
MPE
R
*1 0.01 mm 0.01 mm/0.0005 in
Stem ø8 mm
3/8 in DIA (ø9.52 mm)
Contact point Carbide (M2.5 x 0.45)
Carbide (No.4-48UNF)
Measuring force MPL ≤2.3N
Mass 260 g 260 g 265 g
■Common specifications
Plunger direction Up to direction in which spindle is horizontal
Protection level *2 IP42 *3
CE marking
EMC Directive: EN 61326-1
Immunity test requirement: Clause 6.2 Table 2
Emission limit: Class B
RoHS Directive: EN IEC 63000
Power supply
SR44 silver oxide battery (1 pc., No. 938882, battery life: about 7000 hours in
continuous service)
Scale Electrostatic capacitance type absolute linear encoder
Temperature range Operation: 0 °C to 40 °C, storage: -10 °C to 60 °C
Standard accessories
User's Manual with warranty, Quick Reference Manual, inspection
certificate, SR44 battery (1 pc.), lifting lever (137693)
*1: During normal measurement at 20 °C.
*2: The protection level (IP: International Protection) is based on IEC 60529/JIS C 0920.
*3: Values are for factory default conditions.
*4: The battery life varies depending on usage times and conditions. The above values are
guidelines.
15. Accessories (Optional)
・ Lifting knob: Part No. 21EZA197 (25.4 mm stroke model)
・ Lifting knob: Part No. 21EZA200 (50.8 mm stroke model)
・ Release: Part No. 540774
・ Reverse orientation coil spring: Part No. 02ACA571 (25.4 mm stroke model)
・ Reverse orientation coil spring: Part No. 02ACA773 (50.8 mm stroke model)
・ Connection cable: Part No. 905338 (1 m, flat straight)
・ Connection cable: Part No. 905409 (2 m, flat straight)
*For accessories (optional) other than the above, refer to the Measuring Instruments Catalog.
16. Off-Site Repairs (Subject to Charge)
Off-site repair (subject to charge) is required in the case of the following malfunctions. Contact your
nearest dealer or our sales office.
・ Poor spindle operation
・ Poor accuracy
・ [E] is displayed as the last digit when the spindle is stationary
・ Abnormal measured value or LCD trouble
・ No recovery from [Err 40]
・ Power will not turn on
*If the fundamental structural components or multiple components need to be replaced, we reserve
the right to decline the repair
.
To Previous Page
Loading...
