Operating the unit
49Operating instructions
If the cooking zone door is not opened, the fan continues to run
at a low speed at intervals. This achieves even cooking.
5.10.5 Modifying the cooking program
Tabs available only within cooking programs or the cooking step
display. Tapping the tabs provides faster access to their
functions.
The current step in the cooking program is highlighted and can
be modified. All settings of a step can be modified.
After the settings are made, the modified cooking program can
be saved. The cooking program is overwritten if a new cooking
program name is not specified.
Modifying a cooking program after the program has started
Requirement
Cooking program started
Cooking program has not elapsed
1. Modify the settings for the current step.
The modifications of the step become active immediately.
The modifications of the step are displayed.
2. Tap the "Continue" field.
The active step is being ended.
The next step is being started.
Steps advance in the
Settings
window.
The cooking program is modified.
Modifying a cooking program before the program has started
Requirement
Cooking program open
Cooking program not started
1. Modify various steps.
2. Use a wiping gesture to reach the individual step to be modified.
3. Modify the settings for the step.
The modifications of the step are displayed.
The cooking program can be started without being saved.
If the modifications are to be saved, continue with the next
step.
4. Tap the
green
tab.
The
Tab
window is open.
10015160-0ABBE--
To Next Page
Loading...
