Cleaning and caring for the unit
59Operating instructions
6.10.6 Ending automatic cleaning
Requirement
Automatic rinsing has ended or cleaning time has elapsed
1. Open cooking zone door.
2. Remove the empty cleaning cartridge.
3. Thoroughly rinse away any remaining cleaner or rinse aid.
4. Leave the cooking zone door open slightly until the unit will be
used again.
This extends the service life of the door seal.
No moisture builds up in the cooking zone.
6.11 Cleaning the cooking zone manually
6.11.1 Preparing the cooking zone
ATTENTION
Risk of physical damage from improper cleaning
• Do not clean the unit with a high-pressure cleaner.
Prerequisite
GN containers, baking sheets and grates removed from the cooking
zone
1. Remove any food remains from the cooking zone.
The drain screen is not obstructed.
2. Leave only the support rack in the cooking zone.
3. Close the cooking zone door.
6.11.2 Starting the cleaning program
Requirement
The unit is on
Tap manual cleaning.
10015160-0ABBE--
To Next Page
Loading...
