MKN SpaceCombi Junior MagicPilot - 3.3 Operating, control and display element functions

Description of the unit
18 Operating instructions
3.2.7 USB port
The unit is equipped with a USB port (USB 2.0).
HACCP logs can be exported via the USB port.
A wireless or corded barcode scanner (optional) can be connected to
the USB port.
3.2.8 HACCP logging
All cooling programs run are recorded in the HACCP log.
The data are exported via the USB port.
3.2.9 VideoAssist
VideoAssist can be used to display videos with additional
explanations regarding operation.
3.2.10 WaveClean automatic cleaning
With WaveClean automatic cleaning,the cooking zone is cleaned with
the aid of a cleaning cartridge intended specifically for the program
and then rinsed clean.
3.2.11 CombiDoctor (self-diagnostic program)
CombiDoctor uses a selectable self-diagnostic program to check the
components used for climate control and cleaning.
3.3 Operating, control and display element functions
To see the operating and display elements, fold out the page.
Symbol Operating and display element Function
On Off "I O" button
•
Switch unit on "I"
•
"O" switches off the unit
"Automatic cooking" button
•
Opens the Automatic cooking
menu for selection of programs
"Manual cooking" button
•
Opens the Manual cooking menu
for selection of the cooking
modes
"Equipment functions" button
•
Opens the Equipment function
menu for selection of cleaning
and settings
10015160-0ABBE--