4/152
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
Q25 Camera Manual: Contents
2 Installation 58
2.1 Preparing the Installation 58
2.1.1 Wall-Mounted 59
2.1.2 Ceiling-Mounted 62
2.1.3 Mounting Options 65
2.1.4 Network Connection And Power Supply, UPS 68
2.1.5 Preparing the Camera Connections, MX-Overvoltage-Protection-Box 69
2.1.6 Wiring, Fire Prevention, Lightning and Surge Protection 70
2.2 Mounting the Camera Without Accessories 72
2.2.1 Mounting Instructions 72
2.2.2 Procedure 74
2.3 Mounting the Camera with the On-Wall Set 78
2.3.1 Mounting Instructions 78
2.3.2 Procedure 81
2.4 Mounting the Camera with the In-Ceiling Set 83
2.4.1 Mounting Instructions 83
2.4.2 Procedure 86
2.5 Installing the Vandalism Set 88
2.5.1 Mounting Instructions 88
2.5.2 Procedure 89
2.6 Installing the Wall Mount 91
2.6.1 Mounting Instructions 91
2.6.2 Procedure 94
2.7 Installing the Corner and Pole Mount 96
2.7.1 Mounting Instructions 96
2.7.2 Mounting to a Pole 98
2.7.3 Mounting to a Wall or Building Corner 99
2.7.4 Mounting the Wall Mount to the Corner and Pole Mount 100
2.8 Replacing the MicroSD Card 101
2.8.1 Removing the MicroSD Card 101
2.8.2 Inserting a MicroSD Card 102
2.9 Network And Power Connection 103
2.9.1 Notes on Cable Lengths and Power Supply 103
2.9.2 Connecting the Q25 to the Network Using a Patch Cable 103
2.9.3 Power Supply Using a Switch 104
2.9.4 Power Supply When Connected Directly to a Computer 105
2.9.5 Power Supply with Power-Over-Ethernet Products 105
2.9.6 Connecting a USB Cable 106
2.9.7 Connecting a Two-Wire MxBus Cable 107
To Next Page
Loading...
