Mobotix Q25 - Page 5

5/152
Contents
© MOBOTIX AG • Security-Vision-Systems • Made in Germany
www.mobotix.com • sales@mobotix.com
2.9.8 Variable PoE 108
2.9.9 Camera Startup Sequence 109
3 Operating the Camera 110
3.1 Manual and Automatic Operation– Overview 110
3.2 First Images and the Most Important Settings 112
3.2.1 Manually Setting Up the Network Parameters in a Browser 112
3.2.2 First Images and the Most Important Settings in the Browser 115
3.2.3 First Images and Network Parameter Configuration in MxMC 117
3.2.4 Starting the Camera with Factory (Network) Settings 120
3.2.5 Starting the Camera with an Automatic IP Address (DHCP) 121
3.3 Virtual PTZ and Full Image Recording 122
3.3.1 Preparing the Virtual PTZ Function 122
3.3.2 Full Image Recording 124
3.3.3 Special Q25 Configuration in the Browser 126
3.4 MicroSD Card Recording 133
3.4.1 Introduction 133
3.4.2 Formatting the MicroSD Card 135
3.4.3 Activating MicroSD Card Recording 136
3.4.4 Accessing Data on the MicroSD Card 137
3.4.5 Deactivating Card Recording 137
3.4.6 Using a MicroSD Card in a Dierent MOBOTIX Camera 138
3.4.7 Limitations on Warranty When Using Flash Storage Media 138
3.5 Configuration in the Browser 139
3.5.1 Overview 139
3.5.2 General Browser Settings 141
3.6 Additional Notes 143
3.6.1 Weatherproofness 143
3.6.2 Password for the Admin Menu 143
3.6.3 Permanently Deactivating the Microphone 143
3.6.4 Starting the Camera with the Factory IP Address 143
3.6.5 Resetting the Camera to Factory Settings 144
3.6.6 Activating Event Control and Motion Detection 144
3.6.7 Deactivating Text and Logo Options 144
3.6.8 Deactivating the Camera Reboot 144
3.6.9 Browser 145
3.6.10 Cleaning the Camera and Lens 145
3.6.11 Legal Notes 145
3.6.12 Safety Warnings 145
3.6.13 Online Help in the Browser 146
3.6.14 Declaration of Conformity 147