Mocet IG7600 - Follow Me Call Forward

IG7600 Administration Manual
Copyright 2013 Tecom, Co. LTD. All rights reserved Page 125 of 125
To Activate
*25 + Type + Ext No + * + Password
To Cancel
**25 + Ext No + * + Password
Call Fork
When extension gets an incoming call, the extension gets ringing. It rings another
extension or rings an outside destination simultaneously.
(Type: 0 – ICM, 1 – Outside, 2 – Both; Destination: 1 – First; 2 – Second)
To Activate
*26 + Destination# + Type + Ext No
*26 + Destination# + Type + * + (PSWD) + * + Outside Number
To Cancel
**26  cancel the both forking destination
**261  cancel the first forking destination only
**262  cancel the second forking destination only
Do Not Disturb
Extension users can enable DND to stop incoming calls from ringing at their phone.
To Activate
*4
To Cancel
**4
Call Pickup
Users can answer the calls at another extension. The feature allows you to easily
access calls ringing via the feature access code.
*53 + Ext No.
COS Following
It changes the individual COS of the extension temporarily.
*55 + (phone number) + (password)
Call Back Busy
When remote party is busy, press 6 to wait call back. Press *66 to delete the record.
To Activate
6
To Cancel
*66
Remote Maintenance Simple Enable
*62 + Action Type + Admin. Password
“Action Type”:1 – Enable; 2 – Disable.
To Activate
*621 + Admin. Password
To Cancel