IG7600 Administration Manual
Copyright 2013 Tecom, Co. LTD. All rights reserved Page 126 of 126
*622 + Admin. Password
Remote Maintenance Simple Save
*63 + Admin. Password
Remote Maintenance
*64 + Action Type [+ Log Level] + * + Admin. Password
“Action Type”:1 – Enable; 2 – Disable; 3 – Save and send the tar ball file through email.
“Log Level”: 0 – Error; 1 – Warning; 2 – Info; 3 – Debug
Reset Feature Buttons
Reset all feature buttons to IG7600’s setting.
*68 + (Password)
Reset To Default
Selected IG7600 extension features can be returned to default setting.
*69 + (Extension/Administrator password)
Feature Key Programming
To program the line keys as a PSTN, IP Trunk, Trunk Group number, Call-Park number
or Extension number.
*70 + (Feature Key number: 01 – 44
(*)
) + (Feature Key Type: 00 – 08) + Number
Feature Key Type:
00: Null; Number should be null.
01: Extension; Number can be an Extension number.
02: Trunk; Number can be a PSTN, IP Trunk or Trunk Group number.
03: Call-Park; Number can be a Park number.
04: Feature Key; Number can be a feature access code
05: Others; Number could be an outside phone number.
06. Do Not Disturb; Number should be null.
07: Live Record
08: Virtual Mailbox key; Number can be a Virtual number.
Note: IP2061 provides 4 keys for feature access.
IP2061 supports EDM module, it provides 24 more (total 28) keys for feature access.
Service Mode Selection
Change Service Mode from Operator
*79 + (Service Mode, 0 – 3)
(Service Mode:
0. Change the Service Mode
1: Day Mode
2: Night Mode
3: Time Mode)
To Next Page
Loading...
