IG7600 Administration Manual
Copyright 2013 Tecom, Co. LTD. All rights reserved Page 46 of 46
The Dynamic Host Configuration Protocol (DHCP) is an Internet protocol for automating
the configuration of computers that use TCP/IP. DHCP can be used to automatically
assign IP addresses, to deliver TCP/IP stack configuration parameters such as the
subnet mask and default router, and to provide other configuration information.
This page shows the setting of WAN interface which is DHCP mode (Figure 6-9).
Figure 6-9. Advanced – WAN (DHCP Mode)
The Point-to-Point Protocol over Ethernet (PPPoE) requires a user name and password
that your ISP has provided to you to establish your connection. This page shows the
setting of WAN interface which is PPPoE mode (Figure 6-10).
Figure 6-10. Advanced – WAN (PPPoE Mode)
To Next Page
Loading...
