www.modecom.eu
6
5” GPS Navigation
www.modecom.eu
6
5” GPS Navigation
SN Component Explanation
1 Power key
Powering on/ off the device or enter sleep
mode
2 Stylus slot Location of the stylus
3 Speaker
Playing sounds (such as navigation prompt
tones, music, etc.)
4 Indicator light
Indicating the operating state of external
power supply
5 Earphone jack Connected with the stereophone
6 T-Flash card slot T-Flash card inside
7 AV-In port (option)
Use the AV-In cable to connect the naviga-
tor to a rear view camera via this port while
backing the vehicle. Refer to rear view cam-
era usage.
8 MINI USB port
Communicating with PC via MINI USB
cable, or connected to TMC, or used as the
charging port
9 Light sensor For automatic backlight adjustment
10 Reset key Restart the system
1.2 Power Supply & Charging
Charge the GPS navigator fully with the charger before first use.
1.2.1 Power Supply
The FreeWAY MX2 can be powered by the built-in battery or ex-
ternal power supply.
When the GPS navigator is unconnected to the charger, it is pow-
ered by the Li-polymer battery. The battery capacity icon
in the
system main interface shows current residual battery capacity.
When the GPS navigator is connected to the charger, it is powered
by external power and the battery is charged.
[Attention] The GPS navigator adopts internal non-removable Li-
polymer battery. To avoid battery rupture, explosion, release of haz-
To Next Page
Loading...
Need help?
General
