EEI-3608&3609 OFFICE CHAIR
Customer Service 609-256-9000︱www.modway.com
STEP 1:
1. Please put Base (1) on a carpeted or padded surface.
2. Insert 1 piece of Castor (3) into the Base (1) as shown by hand.
3. Repeat the same steps for the remaining 4 pieces of Castors (3).
4. Carefully turn over the assembled Base (1) and Insert the Cylinder Column (2) as shown.
STEP 2:
1. Please put Top (5) upside down on a carpeted or padded surface.
2. Attach Control Mechanism (4) to the Top (5) by using 4 pieces of Bolts (A) and 4 pieces of Flat
Washer (B) as shown and use Allen Wrench (C) to tighten all Bolts (A) clockwise as shown.
To Next Page
Loading...
